Build A Small Computer Network -LAB, NOT a paper. CS/Comp Architecture respondents ONLY

 Network and Computer Science Respondents only.  Others need not apply
· Learning how to build a small network in Packet Tracer.
· Using basic subnetting skills
· Applying network tools such as Ping, traceroute and ARP.
Use /25 subnet mask to subnet the default IP network address 192.168.10.0/24 and answer/complete the following Tasks:
1. The two generated subnets of the above Network address are 192.168.10.0/25 and 192.168.10.128/25
2. How many usable Host IP addresses you can generate for each subnet?
3. Use the first generated subnet and assign it to LAN1
4. Use the second generated subnet and assign it to LAN2.
5. Assign PC1 ,PC2 and Server1 any Ip addresses for LAN1
6. The last IP address of the first subnet has been assigned to the default gateway which is 19.168.10.126
7. What is the broadcast IP address of LAN1?
8. Assign the last three usable IP addresses of the second subnet to PC3, Server2 and Printer1 respectively.
9. From PC3 are you able to ping Printer 1? Why? Why not?
10. From PC1 ping the default Gateway of LAN1 is it success or Fail? Why? Why not?
11. From PC3 find the path to reach Server1 using the Tracert command.
12. Apply the command arp –a on PC2?
13. From PC2 can you ping Server 1? Why? Why not? If not what do you need to do allow a successful ping? Where do you have to apply the change on which Device if needed?